The Hand-Off – Planning for Successful Transition from Construction to Operations

fmj-nov-dec-2016

As published in the Nov-Dec 2016 edition of IFMA’s FMJ. Consider this: A building is designed, constructed, and turned over to facilities in roughly eighteen to twenty-four months – often launched without adequate testing, training that does not fully prepare engineers, minimal operating parameters defined, and no comprehensive documentation on how to operate & maintain […]

On-Going Commissioning – Leveraging Technology to Ensure Efficient Operations

gears on chalkboard

The two key resources that facilities seemingly always need are money and people.  However, those are often the two that are continually being stretched, as facility departments are instructed to do more with less.  This strain is growing with the exodus of the baby boomers and the consequential skilled labor shortage.  Thus, it is imperative […]

Commissioning & Retro-Commissioning as published in IFMA’s FMJ

fmj-november-december-2015-cover 2

Lowering Utility Costs and Increasing Facility  Performance through Commissioning and Retro- Commissioning by John Rimer as published in the November/December issue of IFMA’s  Facility Management Journal Commissioning is one of the most cost-effective means of ensuring optimum building  performance and efficiency, returning energy savings as high as 25% and payback periods  measured in months.  However, […]

Getting the Most Out of Your Buildings Through Commissioning & Retro-Commissioning

door to outside -facility-management-consulting-consultant-cmms-facilities-training-education-ifma-fm360-rimer

Commissioning is far more than a checkbox on USGBC’s LEED building certification form or a task that the contractor was supposed to-do according to project specifications.  In fact, Commissioning (Cx) and Retro-Commissioning (RCx) are some of the most cost-effective means of ensuring your buildings are performing optimally and efficiently. Lawrence Berkeley National Laboratory (LBNL) released […]

Commissioning & Retro-Commissioning – Helping You Get the Most Out of Your Facilities

FM360
John Rimer

Below is a link to the presentation given by John Rimer at IFMA’s 2013 World Workplace in Philadelphia. FM360 – Cx Presentation 2013   For more valuable articles and resources such as this, visit FM360Online.com and sign-up for FM360′s Newsletter.